Strip Level Tags: level meter, precision level meter 
 Debug level instrument http://www.bthxzw.com/TSSPY.html 
 Strip level tool is mainly used to test a variety of machine tools and other types of equipment rail straightness and flatness, parallelism of the parts with each other location, as well as equipment installation relative to the horizontal position of the tilt. In addition, it can also be used to measure the tiny dip. 
 1, the measurement should be carefully cleaned before measuring surface and dry, check whether the measurement of the surface scratches, rust and burrs and other defects. 
 2 before the measurement, you should check the zero is correct. If allowed, the adjustable level meter should be adjusted, fixed level meter should be repaired. 
 Measurements to avoid the influence of temperature, liquid spirit level impact of temperature changes, therefore, should pay attention to hand hot, direct sunlight, gas and other Level. 
 4, in use, should be the location of the vertical standards on reading, in order to reduce the impact of parallax measurements. 
 Debug level instrument http://www.bthxzw.com/TSSPY.html 
 The Botou Navistar cast material measuring 
 Tel: 5664468 13373071795 
 Chain: Moods