Chinese name of the: crossed disc English name: tosecan 
 Dash disk http://www.bthxzw.com/huaxianpan.html 
 Definition: with the stylus, adjustable marking tool. 
 Applied disciplines: mechanical engineering (a discipline); fitter and assembly tools (two subjects); fitter and assembly hand tools (three subjects) above is published by the National Science and Technology Approval Committee 
 Dash panel structure: dash panel structure composed mainly by the base, column, stylus, and clamping nut. Both ends of the stylus into a straight head-end elbow side used to be crossed and straight head-end elbow side is often used to plan the location of the workpiece. 
 Crossed plate is mainly used for machining the workpiece location and fitter test crossed to find: 
 (1) dash panel structure composed mainly by the composition of the base, column, stylus and clamping nut. Both ends of the stylus into the side and elbow end of the straight head, straight head-end is used to dash elbow side is often used to plan the location of the workpiece, such as machining the workpiece alignment and the work piece surface and crossed platform parallel to the surface of the. 
 (2) program disk requirements: the stylus is clamped firmly, when was the level of state crossed the the stylus basic in a horizontal position, do not tilt too much. Stylus protruding part should be as short as possible, so that the stiffness of the stylus is good, easy to produce jitter. Stylus along a crossed direction to tilt, to be inclined at an angle between the stylus and crossed the surface of the workpiece along a crossed direction, thus reducing the crossed resistance and prevent the phenomenon of the needle bar into the workpiece surface. Temporarily use the stylus straight head end should be perpendicular to the the underscore plate after use the stylus in a vertical state, and the straight head-end down, to prevent injury and reduce the amount of space location. 
 Dash disk http://www.bthxzw.com/huaxianpan.html 
 The Botou Navistar cast material measuring 
 Tel: 5664468 13373071795 
 Contact: Xin Yue