Gear runout tester for meshing cylindrical gears with a center hole, bevel gears, worm and worm gear ring face runout and radial runout were measured. Gear beating the tester can also be on the center hole of the cylindrical and conical radial and face runout were. 
 Gear beating tester http://www.bthxzw.com/cltdjcy.html 
 Gear to beat tester high precision cone surface to the radial circular bound Morse cone ≤ 0.005mm tester top axis parallel to the rail within the scope of 100mm (horizontal and vertical direction) ≤ 0.006mm, the use of this instrument can greatly improve the efficiency and measurement accuracy. 
 Gear runout △ Fr of gear within a turn, the probe in contact with the gear high school two-sided slot gear within gear, the amount of the probe relative to the axle line changes. To this end, the gear runout inspection by the original rack-shaped measuring head. Checked gear, inspection, will be mounted on the mandrel between teeth fixed two thimble instrument measurement head with the original rack tooth profile, followed by insertion gear, and the instructions show the location of the measuring head for gears axis of the runout. 
 A. Meter 
 Gear beating tester is mainly used to check the accuracy of more than six or six cylinder, cone outside the meshing gears and worm runout, face runout. 
 Two. The main technical parameters 
 Measured gear mode the number of 0.3-2mm1-6mm gear maximum diameter 150mm300mm 1-6mm unit price measurement instrument the value of the rotation range ± 0 ° indicator dividing the value of 0.001mm 0.3mm-2 Price changes 10 times the measurement process, not more than the following provisions: the measured smooth surface: measuring gear: ▲ without lever ▲ without lever ▲ the lever 1μm2μm3μm: longer, heightening the price can be negotiated specifications: m1-6CodeNo.42-004 
 Gear beating tester http://www.bthxzw.com/cltdjcy.html 
 The Botou Navistar cast material measuring 
 Tel: 5664468 13373071795 
 Contact: Xin Yue